Disposable mask

Disposable mask

Disposable masks are made of more than three layers of 28 grams of non-woven fabric; the bridge of the nose is made of environmentally-friendly all-plastic strips, contains no metal, is equipped with breathability, and is particularly suitable for electronics factories and daily use. Disposable masks (medical surgical masks) can prevent respiratory infections to a certain extent and cannot prevent haze. Please pay attention when purchasing, you should choose a mask on the outer package clearly marked "Medical Surgical Mask".


Size 17.5cmx9.5cm, 50 pieces / box, 2000 pieces / carton, disposable masks are divided into disposable three-layer masks, disposable non-woven masks, disposable four-layer masks, disposable activated carbon masks.

Disposable three-layer masks are made of two layers of non-woven fabric and filter paper. Disposable three-layer masks are made of two layers of fiber non-woven fabrics that are professionally used for medical and health. More than% of the filter dissolve spray cloth is made by ultrasonic welding. The nose bridge is made of environmentally-friendly all-plastic strips. It does not contain any metal. The filtering effect of BFE is as high as 99%, which is especially suitable for electronics factories; disposable activated carbon masks use a surface layer of 28 g of non-woven fabric, and the first layer in the middle is made of antibacterial filter paper to prevent bacteria by 99%. , To prevent virus damage; the second layer in the middle is made of a new type of high-efficient adsorption and filtering material-activated carbon fiber, activated carbon cloth, which has the functions of anti-virus, deodorization, bacteria filtration, and dust blocking;

Disposable masks are manufactured with environmentally friendly plastic nose bridge strips. The nose bridge clip design can be adjusted most comfortably according to different face shapes. With the optional ultrasonic spot welding, the earbands are very strong and will not fall easily.
Disposable masks can be used in electronics manufacturing, dust-free workshops, catering services, food processing, schools, motorcycles, spray processing, stamping hardware, electroplating, chemicals, steel, welding, health centers, handicraft industries, hospitals, Beauty, pharmacy, factory, environmental cleaning, public places and other uses. Use: hook the elastic ears on both ears, with a full nose type, and gently press the fixed piece to fix, so that the mask fits the face. Product main technical indicators: Carbon tetrachloride adsorption rate:> 70% Benzene adsorption rate: ≥15% Moisture resistance: 80% Area weight: 35 ~ 45g / m2 Remarks: 1. Size: 9CMx17.5 2. Product.

Material characteristics

Everything has its two sides, as do disposable masks. It has some advantages as well as some disadvantages:


Advantages: very good air permeability; can filter toxic gases; be able to keep warm; can absorb water; be waterproof; have elasticity; not messy; feel very good and quite soft; compared to other masks, the texture is lighter; Very flexible, can be reduced after stretching; the price is relatively low, suitable for mass production;


Disadvantages: Compared with other fabric masks, disposable masks cannot be cleaned; because the fibers are arranged in a certain direction, they are easier to tear; compared with other textile masks, the strength of disposable masks and Durability is worse than other masks.

Conditions of Use

There are various types of disposable dust masks, which must be selected according to different operating requirements and working conditions.
The first choice should be based on the concentration and toxicity of the dust. According to GB / T18664 "Selection, Use and Maintenance of Respiratory Protective Products", as half masks, all dust respirators are suitable for environments where the concentration of harmful substances does not exceed 10 times the occupational exposure limit, otherwise a full face mask or protection level should be used Higher respirator.
If the particulate matter is highly toxic, carcinogens, and radioactive, filter materials with the highest filtration efficiency should be selected.

If the particulate matter is oily, be sure to select a suitable filter material.

If the particulate matter is needle-shaped fibers, such as slag wool, asbestos, glass fiber, etc., since the dust mask cannot be washed, the mask with microfibers on it will easily cause facial irritation at the face seal, and it is not suitable for use.

For high-temperature and high-humidity environments, choosing a mask with an exhalation valve will be more comfortable. Choosing a mask that can remove ozone can provide additional protection for welding. However, if the ozone concentration is higher than 10 times the occupational health standard, you can replace the mask. Poison combination filter element. For environments where there is no particulate matter but only certain odors, it is much lighter to choose a dust mask with an activated carbon layer than a gas mask, such as in some laboratory environments, but due to national standards, there is no technical performance specification for this type of mask .


1. Wash your hands before wearing a mask.
2. Hold the ear cord with both hands, with the dark side out (blue) and the light side in (suede white).
3. Place the side of the mask with the wire (a small strip of hard) on the nose, pinch the wire according to your nose shape, and then pull the mask completely down to cover the mouth and nose completely.

4. Disposable masks are usually replaced every 8 hours, and cannot be reused.

Notes edit

1. Please use disposable masks within the validity period.
2. Only for one-time use, destroy after use.
3. The packaging is damaged and it is forbidden to use it.
4. Pay attention to the production date.

Storage conditions

Disposable masks should be stored in a room with a relative humidity not exceeding 80%, non-corrosive gas, and well-ventilated to avoid high temperatures.

Fraud cases

Shoddy masks

In February 2020, a vendor purchased 6 cents of counterfeit and inferior masks, distributed them one by one, and eventually sold them at the price of 3 yuan each; and a vendor sold 1.06 million counterfeit and inferior masks within half a day. It sold out and made a profit of 450,000 yuan.

These fake and inferior masks have obvious quality problems, only a thin layer and poor quality. At this time is the critical period of epidemic prevention and control, wearing fake and inferior masks will bring great security risks. The fake masks have the same name-"Piao An". At present counterfeit "Piao An" masks have appeared in many places across the country.

Henan Piao'an Co., Ltd., which produces regular "Piao'an" masks, is located in Changyuan County, Henan Province, which is one of the three domestic daweicai bases. Since January 28, the WeChat public account of Henan Piao'an Group Co., Ltd. has issued a solemn statement four times, saying that fake and inferior masks on the market are not its production, and consumers are required to report in a timely manner.

Statistics show that up to now, Qingdao, Shandong, Jining, Rizhao, Linyi, Dazhou, Yibin, Zigong, Nanchong, Benxi, Liaoning, Huangshan, Feidong, Guzhen, Anhui, Linxia, Putian, Yangzhou, Jiangsu, Luohe, Nanyang, Henan Chibi in Hubei, Changsha in Hunan, Yiyang in Hunan, and Huangpu in Shanghai, etc., have all intervened to investigate and deal with fake and inferior masks that are counterfeit.

Three masks

In February 2020, Sichuan Neijiang seized more than 500,000 Sanwu masks. Hubei Xiantao criminal suspect Guo Moumou and Neijiang woman Liu Moumou purchased and sold the “Three Wus” through the Internet without the relevant qualifications. When entering the area under the jurisdiction of Neijiang, the mask was actively reported by the police and was arrested on the spot by the police, and the case was investigated for crimes of selling medical equipment that did not meet the standards.